Disposal; Warranty - Dometic ACC3100D Instructions Manual

Roof top ventilation system performance booster service kit
Hide thumbs Also See for ACC3100D:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
 
Problem
The LED does not lights up.
Related information
Replacing the battery
on page 13

11 Disposal

Recycling products with batteries, rechargeable batteries and light sources: Remove any batteries,
rechargeable batteries, and light sources before recycling the product. Return defective or used batteries
to your retailer or dispose of them at collection points. Do not dispose of any batteries, rechargeable bat-
teries, and light sources with general household waste. If you wish to finally dispose of the product, ask
your local recycling center or specialist dealer for details about how to do this in accordance with the ap-
plicable disposal regulations. The product can be disposed free of charge.
Recycling packaging material: Place the packaging material in the appropriate recycling waste bins wher-
ever possible.

12 Warranty

For repair and warranty processing, please include the following documents when you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Possible cause
Sensor without battery only: The
power cable is defective.
Sensor without battery only: The
voltage is too low.
Sensor without battery only: The
plug connector is defective.
The hose is not connected correctly.
The hose is defective.
The sensor is defective.
No power supply.
Sensor without battery only: The
power supply is defective.
Sensor without battery only: The
plug connector is defective.
Suggested remedy
Replace the power cable.
Check the voltage of the vehicle
battery. If necessary, charge the
battery.
Replace the plug connector.
Connect the hose correctly.
Replace the hose.
Replace the sensor.
Sensor with battery only:
Check if the battery is not dis-
charged. If necessary, replace
the battery.
Sensor without battery only:
Check if the sensor is properly
connected to the power supply.
If necessary, reconnect the pow-
er supply.
Replace the power supply.
Replace the plug connector.
EN
17

Advertisement

Table of Contents
loading

Table of Contents