Printed Image Trouble - Olivetti d-COLOR P2226 Operation Manual

Troubleshooting > Troubleshooting

Printed Image Trouble

When the following printed image trouble occurs, implement appropriate procedures.
Symptom
Printed images are totally
too light.
White background parts of
the image have a slight
overall coloration.
Black or colored points
appear in white background
parts of the image.
White or color dots appear
on the printed images.
Checkpoints
Is the paper damp?
Is the toner distributed evenly within the
toner container?
Is EcoPrint mode enabled?
—
—
—
—
—
―
—
―
―
―
Corrective Actions
Replace the paper with new paper.
Shake the toner container from side to
side several times.
Disable [EcoPrint] mode.
Make sure the paper type setting is
correct for the paper being used.
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [Drum] > [OK] > [OK].
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [LSU] > [OK] > [OK].
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [DEV-CLN] > [OK] > [OK].
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [Drum] > [OK] > [OK].
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [MC] > [OK] > [OK] and increase
the adjustment value. Increase the adjustment
value 1 level at a time from the current value. If
there is no improvement after the value is
increased by 1 level, increase by 1 level again.
If there is still no improvement, return the
setting to the original value.
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [Drum] > [OK] > [OK].
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [MC] > [OK] > [OK] and increase
the adjustment value. Increase the adjustment
value 1 level at a time from the current value. If
there is no improvement after the value is
increased by 1 level, increase by 1 level again.
If there is still no improvement, return the
setting to the original value.
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [MC] and decrease the
adjustment value. Decrease the adjustment
value 1 level at a time from the current value. If
there is no improvement after the value is
decreased by 1 level, decrease by 1 level
again. If there is still no improvement, return the
setting to the original value.
Select the [Menu] key > [Adjust/Maintenance]
> [Service] > [DEV-CLN] > [OK] > [OK].
8-9
Reference
Page
page 3-2
page 8-3
page 6-9
page 6-6
—
―
―
—
―
—
―
―
―