Safety Instructions; Installing The Power Supply And Cord - Paradyne FrameSaver SLV 9626 Installation Instructions Manual

Safety Instructions

Please refer to the Important Safety Instructions and EMI Warnings beginning on
page 18.

Installing the Power Supply and Cord

1. Insert the 4-prong plug into the POWER jack.
When inserting the plug at the rear of the FrameSaver unit, align the plug with the
notch above the POWER jack. Make sure the locking tab snaps securely into the
jack.
Locking
Tab
2.
3.
4. Plug the power cord into the grounded power outlet.
Verification Check:
Did any LEDs light?
– If yes, the FrameSaver unit has power.
– If no, refer to Troubleshooting in the User's Guide.
POWER COM
2.
NET MDM DBM
Power Cord /
Transformer
3.
The front panel
OK LED lights.
3
Insert the 3-prong plug
into an ac outlet.
3-Prong
Grounded
AC Outlet
99-16478