Shortcut Key Operations - Roland VS-2000 Appendices

Shortcut Key Operations

Here is a list of the functions that can be performed by pressing multiple buttons, or using the TIME/VALUE dial
in conjunction with a button.
■ FUNCTION buttons
[F1 (PROJ)]
[F2 (TRACK)]
[F3 (EFFECT)]
[F4 (UTIL)]
[F5 (WAVE)]
[F6 (MARKER)]
■ TRACK/STATUS,INPUT, and FX buttons
Hold [TRACK/STATUS] (*1)
(When using the Quick Routing screen)
[TRACK/STATUS]+ [CLEAR]
• [CLEAR] + [TRACK/STATUS] (1–17/18) (*2)
• [CLEAR] + INPUT [1]–[10]
• [CLEAR] + [FX1]–[FX6]
• [TRACK/STATUS] + [TRACK/STATUS]
(*2)(*3)
• INPUT [1]+[2] – [9]+[10] (*3)
• [FX1] + [FX2] – [FX5] + [FX6] (*3)
(*1) When buttons are showing track conditions
(*2) When [CH EDIT] is lit.
(*3) Hold down button of an odd-numbered channel, and press button of the next highest-numbered (even-numbered) channel.
■ Transport Control buttons
[SHIFT] + [ZERO]
[SHIFT] + [REW]
[SHIFT] + [FF]
(after shutdown) [SHIFT] + [PLAY]
[REC] + [TRACK/STATUS] (1–17/18)
[STOP] + [TRACK/STATUS] (1–17/18)
■ PREVIOUS/NEXT/TAP MARKER buttons
[SHIFT] + [PREVIOUS]
[SHIFT] + [NEXT]
[CD-RW] + [TAP MARKER]
[CLEAR] + [TAP MARKER]
[SHIFT] + [CLEAR] + [TAP MARKER] →
[ENTER/YES]
[SHIFT] + [TAP MARKER]
(*4) When PREVIOUS/NEXT Sw is "MARKER."
(*5) When PREVIOUS/NEXT Sw is "PHRASE."
■ AUTOMIX
[SHIFT] + [AUTOMIX]
[AUTOMIX] + [TAP MARKER (SNAPSHOT)]
[AUTOMIX] + [REC (AUTOMIX REC)]
14
To the PROJECT LIST screen
To the TRACK REGION/PHRASE EDIT MENU screen
To the EFFECT VIEW screen
To the UTILITY MENU screen
Display wave form
Show MARKER dialog
To the QUCIK ROUTING screen
All track assignments are canceled.
Adjust the each channel faders to set the "0 dB," and the PAN (BALANCE)
knobs to set the "Center."
Channel Link mode on/off
Store current song data to the disk drive
Moves to the first recorded audio of the project.
Moves to the last recorded audio of the project.
Restart
Switch the status to REC
Switch the status to PLAY
If there is a phrase at the current location, move to the beginning of that phrase. (*4)
If not, move to the end of the previous phrase. (*4)
Move to the previous marker. (*5)
If there is a phrase at the current location, move to the end of that phrase. (*4)
If not, move to the beginning of the next phrase. (*4)
Move to the next marker. (*5)
Register a marker for audio CD track number
Erase a marker
Erase all markers
To the TEMPO MAP screen
To the AUTOMIX SETUP screen
Stores a snapshot (when Automix is "on.")
Automix real time recording (when Automix is "on.")