Using The Headphones; Using The Pedals; Basic Operations Of Functions - Roland MP200 Owner's Manual

Using the Headphones

Use headphones if you want to perform without the sound being
heard nearby. This piano has two headphone jacks, two people can
also use headphones simultaneously.
1 .
Connect your headphones to the headphone jack.
When you connect headphones, sound is no longer heard from
the piano's speakers.
2 .
Use the [ ] knob to adjust the volume of the
headphones.
MEMO
Whenever you are not using the headphones, you can hang them
on the headphone hook.

Using the Pedals

By pressing the pedals, you can apply effects to the sound of the
piano.
Soft pedal
Sostenuto pedal
Use this pedal to sustain the sound. While this
pedal is held down, notes will be sustained
Damper pedal
for an extended time even if you release your
fingers from the keyboard.
(right)
The resonance of the sound is affected by how
deeply you press the pedal.
Sostenuto pedal
The notes you are pressing when this pedal is
depressed will be sustained.
(center)
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces
Soft pedal
a sound that is not as strong as when otherwise
played with the equivalent strength. The
(left)
softness of the tone can be varied subtly by the
depth to which you press the pedal.
* When operating the pedal, take care not to pinch your fingers
between the moving part and the body of the unit. Pay special
attention to this when using the unit where children are present.
NOTE
Under the pedals there is an adjuster for securing the pedals. As
you use the piano, the adjuster might creep upward, allowing the
pedals to wobble when you step on them. If this occurs, turn the
adjuster to lower it into firm contact with the floor. In particular
if the piano is placed on carpet, you should lower the adjuster so
that it firmly presses down on the floor.
Adjuster
Headphone hook
Damper pedal

Basic Operations of Functions

To operate the functions of this piano, you use the [ ] (select/
confirm) knob and the [ ] (back) button.
Change an on-screen item or value
Confirm
Return to the previous screen / Exit
the current screen
Return to the default value
Before You Play
Turn the [ ] knob
Press the [ ] knob
Press the [ ] button
Long-press the [ ] knob
7