Roland Sound Canvas SC-8850 Owner's Manual page 237

Address(H) Size(H)
40 03 00 00 00 02
40 03 01#
40 03 03 00 00 01
40 03 04 00 00 01
40 03 05 00 00 01
40 03 06 00 00 01
40 03 07 00 00 01
40 03 08 00 00 01
40 03 09 00 00 01
40 03 0A 00 00 01
40 03 0B 00 00 01
40 03 0C 00 00 01
40 03 0D 00 00 01
40 03 0E 00 00 01
40 03 0F 00 00 01
40 03 10 00 00 01
40 03 11 00 00 01
40 03 12 00 00 01
40 03 13 00 00 01
40 03 14 00 00 01
40 03 15 00 00 01
40 03 16 00 00 01
* Regarding EFX TYPE and EFX PARAMETER, please refer to page 91, 216
Address(H) Size(H)
40 03 17 00 00 01
40 03 18 00 00 01
40 03 19 00 00 01
40 03 1B 00 00 01
40 03 1C 00 00 01
40 03 1D 00 00 01
40 03 1E 00 00 01
40 03 1F 00 00 01
* EFX TYPE is a macro parameter which sets various Insertion Effect parameters as a group. When you use EFX TYPE to select an Insertion Effect type, each effect parameter will be set to the
most suitable value.
Patch Part parameters
The SC-8850 has 16 Parts in Group A, Group B, Group C, and Group D respectively. Parameters that can be set individually for each Part are called Patch Part parameters. If you specify a part in
Group A, specify the address 40 ** ** using the block number to the corresponding part from PORT A (normally MIDI IN 1). If you specify a part in Group B, specify the address 40 ** ** using the
block number to the corresponding part from PORT B (normally MIDI IN 2).
If you use Exclusive messages to set Patch Part parameters, specify the address by Block number rather than Part Number (normally the same number as the MIDI channel). The Block number can
be specified as one of 16 blocks, from 0(H) to F(H).
The relation between Part number and Block number is as follows.
x...BLOCK NUMBER (0 – F), Part 1
Part 2
:
Part 9
Part10
Part11
Part12
:
Part16
n... MIDI channel number (0 – F) of the BLOCK.
In the following map, the control numbers of the control changes are indicated as CC#.
Address(H) Size(H)
40 1x 00 00 00 02
40 1x 01#
40 1x 02 00 00 01
40 1x 03 00 00 01
40 1x 04 00 00 01
40 1x 05 00 00 01
40 1x 06 00 00 01
40 1x 07 00 00 01
40 1x 08 00 00 01
40 1x 09 00 00 01
40 1x 0A 00 00 01
* When "GM1 System On" and "GM2 System On" are received, Rx. NRPN will be set OFF. When "GS Reset" is received, it will be set ON.
Data(H)
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
00 – 7F
Data(H) Parameter
00 – 7F EFX SEND LEVEL TO REVERB
00 – 7F EFX SEND LEVEL TO CHORUS
00 – 7F EFX SEND LEVEL TO DELAY
00 – 7F EFX CONTROL SOURCE1
00 – 7F EFX CONTROL DEPTH1
00 – 7F EFX CONTROL SOURCE2
00 – 7F EFX CONTROL DEPTH2
00 – 7F EFX SEND EQ SWITCH
(default MIDIch = 1) x=1
(default MIDIch = 2) x=2
: :
(default MIDIch = 9) x=9
(default MIDIch =10) x=0
(default MIDIch =11) x=A
(default MIDIch =12) x=B
: :
(default MIDIch =16) x=F
Data(H) Parameter
00 – 7F TONE NUMBER
00 – 7F
00 – 10 Rx. CHANNEL
00 – 01 Rx. PITCH BEND
00 – 01 Rx. CH PRESSURE(CAf)
00 – 01 Rx. PROGRAM CHANGE
00 – 01 Rx. CONTROL CHANGE
00 – 01 Rx. POLY PRESSURE(PAf)
00 – 01 Rx. NOTE MESSAGE
00 – 01 Rx. RPN
00 – 01 Rx. NRPN
Parameter
EFX TYPE
EFX PARAMETER 1
EFX PARAMETER 2
EFX PARAMETER 3
EFX PARAMETER 4
EFX PARAMETER 5
EFX PARAMETER 6
EFX PARAMETER 7
EFX PARAMETER 8
EFX PARAMETER 9
EFX PARAMETER 10
EFX PARAMETER 11
EFX PARAMETER 12
EFX PARAMETER 13
EFX PARAMETER 14
EFX PARAMETER 15
EFX PARAMETER 16
EFX PARAMETER 17
EFX PARAMETER 18
EFX PARAMETER 19
EFX PARAMETER 20
Description
0-127
0-127
0-127
Off, CC1-95, CAf, Bend
-100 – 0 – +100 [%]
Off, CC1 – 95, CAf, Bend
-100 – 0 – +100 [%]
OFF/ON
Description
CC#00 VALUE 0 – 127
P.C. VALUE 1 – 128
1 – 16, OFF
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
Appendices
Default Value (H) Description
00 00 00: Thru
Default Value (H) Description
28 40
00 0
00 0
00 Off
40 0 (%)
00 Off
40 0 (%)
01 ON
Default Value (H) Description
00 0
00 1
Same as the Part Number
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
01 ON
00 (01*) OFF (ON*)
237