Roland Sound Canvas SC-8850 Owner's Manual page 123

59: OD1/OD2 (Overdrive/Distortion 1, 2)
This connects two effect units in parallel, each of which
allows you to select Overdrive or Distortion.
fig.9-64
Overdrive/
L
Distortion 1
Overdrive/
R
Distortion 2
OD1 (Overdrive/Distortion 1)
OD1 Sel (OD1 Select)
Selects either Overdrive or Distortion for set 1.
+OD1 Drive (OD1 Drive)
Adjusts the degree of distortion for set 1. The volume will
change together with the degree of distortion.
OD1 Amp (OD1 Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [3 (40 03 05)]
Selects the type of guitar amp for set 1.
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk :large triple stack amp
OD1 Amp Sw (OD1 Amp Switch)
Turns OD1 Amp on/off.
OD1 Pan (OD1 Output Pan)
Sets the stereo location of the overdrive or distortion sound
for set 1. L63 is far left, 0 is center, and R63 is far right.
OD1 Level
Adjusts the overdrive or distortion volume for set 1.
OD2 (Overdrive/Distortion 2)
OD2 Sel (OD2 Select)
Selects either Overdrive or Distortion for set 2.
#OD2 Drive (OD2 Drive)
Adjusts the degree of distortion for set 2. The volume will
change together with the degree of distortion.
OD2 Amp (OD2 Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [8 (40 03 0A)]
Selects the type of guitar amp for set 2.
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
OD2 Amp Sw (OD2 Amp Switch)
Turns OD2 Amp on/off.
OD2 Pan (OD2 Output Pan)
Sets the stereo location of the overdrive or distortion sound
for set 2. L63 is far left, 0 is center, and R63 is far right.
OD2 Level
Adjusts the overdrive or distortion volume for set 2.
Level (Output Level)
Adjusts the output level.
[11H, 03H]
Pan
Pan
Odrv/Dist [1 (40 03 03)]
0–127 [2 (40 03 04)]
Off/On [4 (40 03 06)]
L63–0–R63 [16 (40 03 12)]
0–127 [17 (40 03 13)]
Odrv/Dist [6 (40 03 08)]
0–127 [7 (40 03 09)]
Off/On [9 (40 03 0B)]
L63–0–R63 [18 (40 03 14)]
0–127 [19 (40 03 15)]
0–127 [20 (40 03 16)]
60: OD/Rotary (Overdrive/Distortion, Rotary) [11H, 04H]
This connects Overdrive or Distortion in parallel with
Rotary.
fig.9-65
Overdrive/
L
Distortion
R
Rotary
OD (Overdrive/Distortion)
OD Sel (OD Select)
Selects either Overdrive or Distortion.
+OD Drive (OD Drive)
Adjusts the depth of overdrive or distortion. The volume
will change together with the depth of distortion.
OD Amp (OD Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [3 (40 03 05)]
Select the type of guitar amp for overdrive or distortion.
Small: small amp
BltIn: single-unit type amp
2-Stk: large double stack amp
3-Stk: large triple stack amp
OD Amp Sw (OD Amp Switch)
Turns the OD Amp parameter on/off.
OD Pan (OD Output Pan)
Sets the stereo location of the overdrive or distortion sound.
L63 is far left, 0 is center, and R63 is far right.
OD Level
Adjusts the volume of the overdrive or distortion sound.
RT (Rotary)
RT L Slow (RT Low Frequency Slow Rate)
Adjusts the speed of the low-range rotor for the slow-speed
setting.
RT L Fast (RT Low Frequency Fast Rate)
Adjusts the speed of the low-range rotor for the fast-speed
setting.
RT Lo Accl (RT Low Frequency Acceleration)
Adjusts the time over which the rotation speed of the low-
range rotor will change from low-speed to high-speed (or
high-speed to low-speed) rotation. Smaller values will
require greater time to reach the new rotational speed.
RT Lo Lev (RT Low Frequency Level)0–127 [9 (40 03 0B)]
Adjusts the volume of the low-range rotor.
Using Insertion Effects
Pan
Pan
Odrv/Dist [1 (40 03 03)]
0–127 [2 (40 03 04)]
Off/On [4 (40 03 06)]
L63–0–R63 [16 (40 03 12)]
0–127 [17 (40 03 13)]
0.05–10.0 [6 (40 03 08)]
0.05–10.0 [7 (40 03 09)]
0–15 [8 (40 03 0A)]
123