Table of Contents
Advertisement
Care and cleaning
Emptying the condensed water
container
If you have not connected the machine to a
separate drain the condensed water container
must be emptied after each load. Remove the
condensed water container, empty out the water
and replace the container.
If the condensed water container becomes full
to overfl owing, the programme is interrupted
and "Over Flow" appears on the display. Empty
the container and press the Start button to
restart the programme. For connection to a
separate drain, see the installation instructions
in the set of documents.
NOTE!
The dryer must not be used without the
condenser unit in place.
16
Cleaning the condenser
The condenser should be cleaned at least three
times a year. If you have pets, the condenser
must be cleaned more frequently.
1. Turn off the tumble dryer with the main power
switch and open the outer door.
2. Remove the plinth
3. Open the condenser panel by turning the two
knobs.
4. Remove the condenser and rinse the ribs
clean, such as with a hand-held shower. Do
not poke around in the rib gaps as you may
damage the condenser. Do not use pointed
metal objects when cleanin
Advertisement
Table of Contents
