Table of Contents
Advertisement
Chapter 2. Using the RG-3M with an External Display or Television
Connecting a Television
fig.02-040
RG-3M's Jack Panel
Video Out jack
■ Making the Connections
* To prevent malfunction and/or damage to speakers or other devices, always turn
down the volume, and turn off the power on all devices before making any
connections.
1.
Turn off the power to the RG-3M and the television to be
connected.
2.
Use a video cable (commercially available) to connect the RG-
3M's Video Out jack with the television's video input jack.
3.
Turn on the power to the RG-3M.
4.
Turn on the power to the television.
■ Switching Television Formats
If you find that the image quality of the television is poor, try switching the
television format.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the EXT DISPLAY screen.
3.
Press the [
select the television format.
fig.02-050d
Value:
PAL, NTSC
4.
Press the [Function] (Exit) button so the indicator goes out.
When you press the [DISPLAY] button on the remote control, the content
being displayed switches to the television.
Song Select screen → Lyrics screen → Slide show → Notation → Song Select
screen...
Video Cable
] (Value -) button or [
Television
] (Select +) button to
] (Value +) button to
NOTE
You cannot display
information or images with
a television when an
external display is connected
to the Ext Display connector.
To use an television, first
disconnect the external
display from the Ext Display
connector, then connect the
television.
You can save this setting in
the RG-3M's memory using
the Memory Backup
function (p. 75).
To change the settings
indicated in the display, refer
to "Selecting What is To Be
Displayed on the External
Display or Television" (p. 50)
49
.
Advertisement
Table of Contents
