Adding Echo To The Mic Vocals (Mic Echo) - Roland RG-3M Owner's Manual

■ Adding Echo to the Mic Vocals (Mic Echo)

This adjusts the microphone echo when a microphone is connected to the
RG-3M.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [
display the MIC ECHO screen.
fig.01-160d
3.
Press the [Song] (Select -) button or [
the value for "Type" to flash.
fig.01-170d
4.
Press the [
change the echo type.
Value
1
2
5.
Press the [Song] (Select -) button or [
the value for "Level" to flash.
fig.01-180d
6.
Press the [
change the amount of echo applied to the sound.
Value
0–9
7.
Press the [Function] (Exit) button so the indicator goes out.
] (Value -) button or [
Description
Adds basic reverberations.
Adds reverberations for a karaoke-type echo.
] (Value -) button or [
Description
More echo is applied as the value is increased.
No echo is applied to the microphone vocals when the value is
set at "0."
Chapter 1. Playing Back Songs
] (Select +) button to
] (Select +) button to get
] (Value +) button to
] (Select +) button to get
] (Value +) button to
39