Connecting An External Display Or Television; Connecting An External Display; Connecting A Television - Roland HPi-7S Owner's Manual

Connecting an External Display

or Television
You can connect a computer monitor or other external display or a
television to the HPi-7S, enabling you to display the Panel, Slide show
or Notations on a larger screen.
■ Connecting an External Display
HD D-Sub type
(Mini)
Display Cable
Jack Panel
Ext Display Connector
Displays That Can Be Connected to This
Instrument
In general, a great many of the VGA monitors and
multiscan monitors that are available on the market are
compatible with this instrument. However, before you
connect any monitor, make sure it meets the following
specifications:
Resolution
Horizontal scan frequency
Vertical scan frequency
Connector
Signal
Confirm that the display to be used is compatible with the
frequencies mentioned above. Using a display that is not
NOTE
compatible with the above frequencies may result in
incorrect image output when images move, and in certain
cases may even damage the display.
Making the Connections
To prevent malfunction and/or damage to speakers or other
NOTE
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1.
Turn off the power to the HPi-7S and the display to be
connected.
2.
Connect your display to the HPi-7S.
Use display cable (sold separately) to connect the display to the
Ext Display connector on the HPi-7S.
HD D-Sub type
(Mini)
External Display
640 x 480 pixels
31.5 kHz
60 Hz
3-row, 15-pin D-Sub type
Analog
Connecting to Other Devices
Do not connect external devices to both the external display
connector and the Video Out connector at the same time.
NOTE
Doing so may cause the display to appear strange, or may
cause malfunction.
3.
Switch on the HPi-7S (p. 18).
4.
This sets the display format (p. 112).
5.
Switch on the connected display.
For more on handling the external display, refer to your
display's owner's manual.

■ Connecting a Television

Video Cable
Jack Panel
Video Out jack
Making the Connections
To prevent malfunction and/or damage to speakers or other
NOTE
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1.
Turn off the power to the HPi-7S and the television to be
connected.
2.
Connect your display to the HPi-7S.
Use a video cable (sold separately) to connect the HPi-7S's Video
Out jack with the television's video input jack.
3.
Turn on the power to the HPi-7S ( p. 18).
4.
This sets the display format (p. 112).
5.
Turn on the power to the television.
Television
111