Table of Contents
Advertisement
■ Synchronizing the Timing of
the Piano and Accompaniment
With certain CDs designed to be used with the player
function, the timing of the piano and accompaniment sounds
may not be synchronized. However, you can synchronize the
piano and accompaniment.
1.
Press the [Function] (Exit) button, getting its indicator
to light.
2.
Press the [Song] (Select -) button or [
button to display the CD screen.
3.
Press the [Song] (Select -) button or [
button to get the value for "Sync" to flash.
4.
Press the [
] (Value -) button or [
button to adjust the timing of the piano sound.
Value
Description
The piano sound is delayed more as the value
0–200
is increased.
5.
Press the [Function] (Exit) button so the indicator goes
out.
Chapter 6. Changing Various Settings
■ Setting the Type of CD To Be
Played Back
The RG-3M may be unable to correctly recognize the type of
CD being used. In such instances, you can specify the type of
CD manually.
1.
Press the [Function] (Exit) button, getting its indicator
to light.
2.
Press the [Song] (Select -) button or [
] (Select +)
button to display the CD screen.
3.
Press the [Song] (Select -) button or [
] (Select +)
button to get the value for "Mute" to flash.
4.
Press the [
] (Value +)
button to select the CD type.
Auto
Type A
Type B
Off
NOTE
Note that some commercial player piano CDs cannot be played
back on the RG-3M.
5.
Press the [Function] (Exit) button so the indicator goes
out.
] (Value -) button or [
Value
The CD type is detected automatically.
General CDs for Player Piano contain
audio and MIDI data, and the data format
may vary from one CD to the next. If the
CD's data format does not match the RG-
3M's settings, a "beep" will sound. Certain
general Automatic Piano CDs may not be
playable on the RG-3M.
Commercial Audio CD (CDs other than
those designed for use with the player
piano)
] (Select +)
] (Select +)
] (Value +)
Description
95
Advertisement
Table of Contents
