Operation - Edirol M-10E Owner's Manual

OPERATION

941
* Once the connections have been completed (p. 16), turn on power to your various
1. Switch off the M-10E and all the units to be connected.
2. Make all the necessary connections. Set the BALANCE knob of each channel to
the center position and the SENS knob of each channel to the "+4" position. Set
each Channel VOLUME slider to "0" (the marked position) and the MASTER
Volume slider to the "- " position.
943
* Always make sure to have the MASTER volume level turned down before
fig.6
3. Switch on all the units connected to the M-10E.
4. Switch on the M-10E.
944a
* When operating on battery power only, the unit's indicator will become dim when
5. Slowly raise the MASTER Volume slider to an appropriate level.
devices in the order specified. By turning on devices in the wrong order, you risk
causing malfunction and/or damage to speakers and other devices.
switching on power. Even with the volume all the way down, you may still hear
some sound when the power is switched on, but this is normal, and does not
indicate a malfunction.
battery power gets too low. Replace the battery as soon as possible.
19