Setup Using An Ethernet Cable - D-Link DAP-1900 User Manual

Section 4 - Wi-Fi Mesh Setup

Setup Using an Ethernet Cable

Step 1
Connect and plug in the DAP-1900 close to your Wi-Fi Mesh router and wait
for the LED light to blink orange.
<1m
Step 2
Use the Ethernet cable to connect the DAP-1900 to one of the LAN ports
on the Wi-Fi Mesh router. The pairing process may take a few minutes. The
Status LED of the DAP-1900 will turn solid white once it has finished pairing
with your Wi-Fi Mesh router.
Step 3
Disconnect the Ethernet cable and unplug the extender. Place the extender
anywhere between your router and the area where you want expanded
wireless coverage.
D-Link DAP-1900 User Manual 40