Table of Contents
Advertisement
Section 3 - Configuration
This page lets you configure the network settings for the DAP-1900. To access this page, click Settings at the top of the page, then
select Network. Click Save to apply the settings when you are done with your changes.
Management Link
You can change the URL name of the device by editing the
text in the text box.
The Advanced Settings of the Network Settings page allows you to configure
both IPv4 and IPv6 settings for communicating with the DAP-1900.
My LAN Connection is
Configure how the IP address should be assigned: Dynamic
IP or Static IP address. If you select Dynamic IP, the options
below will not be available.
IP Address
Assign an IPv4 address. This address should be outside of the
uplink router's DHCP address pool.
Subnet Mask
Enter the subnet mask. It is used to determine the subnet of
an IP address.
Gateway Address
Enter the gateway address. This is usually the IP address of
the uplink router.
Primary DNS
Enter the address of the primary DNS server. It is the address
of the server used to resolve hostnames to IP addresses.
Secondary DNS
Enter the address of the secondary DNS server. This is optional
but will provide backup if the primary server fails.
D-Link DAP-1900 User Manual
Network Settings
Advanced Settings
IPv4
31
Advertisement
Table of Contents
