Setup Using An Ethernet Cable - D-Link EXO DRA-1360 User Manual

Section 4 - Wi-Fi Mesh Setup

Setup Using an Ethernet Cable

Step 1
Connect and plug in the DRA-1360 close to your Wi-Fi Mesh router and wait
for the LED light to blink orange.
< 1 m
Step 2
Use the Ethernet cable to connect the DRA-1360 to one of the LAN ports on
the Wi-Fi Mesh router. The pairing process may take a few minutes. The status
and the signal indicator LEDs on the DRA-1360 will turn solid green once it
has finished pairing with your Wi-Fi Mesh router.
Step 3
Disconnect the Ethernet cable and place the Wi-Fi Mesh compatible device
anywhere in your home to extend your home Wi-Fi.
D-Link DRA-1360 User Manual 42