Table of Contents
Advertisement
Section 3 - Configuration
Wireless - Smart Connect Disabled (Continued)
Status
Enable or disable the 5 GHz network by toggling this slider.
Wi-Fi Name (SSID)
This is the name of the DAP-1900's extended network. If
using Wi-Fi, the DAP-1900 will rebroadcast the uplink router's
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password
Enter the password or network key that you wish to use for
the extended 5 GHz network.
Security Mode
Select a connection security requirement from the following:
WPA3-Personal
Wi-Fi Protected Access 3 security protocol as the strongest
security.
WPA2/WPA3-Personal
WPA2 and WPA3 clients can connect simultaneously.
WPA/WPA2-Personal
WPA and WPA2 clients can connect simultaneously.
Schedule
Select the time during which the wireless network will be
available. The schedule may be set to Always Enable or you
can add your own schedules.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at
the top of each column. To add a time period to the schedule,
simply click on the start time and drag to the end time. You
can add multiple days and multiple periods per day to the
schedule.
D-Link DAP-1900 User Manual
5 GHz Extended Wi-Fi
30
Advertisement
Table of Contents
