Configuration; Home - D-Link DAP-1900 User Manual

Ac1900 mesh wi-fi range extender

Table of Contents

Section 3 - Configuration

The home screen gives a summary of the current status of devices connected to the DAP-1900. A green check between the

extender and the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present,

or there is a connection error. If there's no active uplink connection, click on the Click to repair button to start the setup wizard.

Note: If the DAP-1900 is connected to a Wi-Fi Mesh supported router, then the home screen will only show the Firmware Upgrade

function. Other functions for the DAP-1900 can be configured from the router's configuration page. For more details, refer to "Home

- Connected to a Wi-Fi Mesh Router" on page 25.

Uplink Router

This icon shows the status of the Internet connection through the uplink router. It is grey if the DAP-1900 is not

connected to an uplink router. Once connected, click on it to see its connection details.

DAP-1900

Click on this icon to see network setting status such as IPv4 and IPv6 configurations of the DAP-1900.

Connected Clients

Click on the Connected Clients icon to see client details.

D-Link DAP-1900 User Manual

Configuration

Table of Contents