Table of Contents
Advertisement
GENERAL
Important Points
The Mira shower seat has been designed for installation inside a shower cubicle,
over a bath or within the drying area.
The shower seat must be secured to a flat, sound and solid wall surface ('solid'
means constructed of brick or high density concrete block).
Warning! All screws and wall plugs supplied must be securely fitted to the full
depth.
Warning! This product has been designed as a seat only and should not be used
for any other purposes.
Note! The shower seat may be fixed to other wall types, but advice must be sought
from a competent builder regarding wall structure and fastening prior to fitting.
Cavities, voids, loose material, cables and pipes must be avoided when locating
the fixing screws.
Maximum Weight - 95.5 kg (15 stone) evenly distributed about the seat.
Fixing Height
The fixing height of the shower seat depends largely on the height of the user, it
will usually be somewhere between 400-500 mm above the bottom of the shower
tray, bath or floor.
A simple method of determining the shower seat height would be to measure the
seat height of the users favourite/most comfortable chair, and fix the shower seat
at a similar height.
2
Advertisement
Table of Contents
