Flex bay cage
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
3. Remove the side panel. See "Side panel" on page 52.
4. Remove the optional hard disk drive and bracket. See "Optional hard disk drive and bracket" on page
64.
5. Remove the flex bay fan. See "Flex bay fan" on page 65.
6. Remove the flex module. See "Flex module" on page 67.
7. Remove the 15–in-1 media card reader if any. See "15–in-1 media card reader" on page 68.
Removal steps
Remove the flex bay cage.
66
ThinkStation P5 Hardware Maintenance Manual
, and print the following instructions.