Setting The Number Of Copies; Reduction/Enlargement/Zoom; Automatic Ratio Selection - Sharp AR-5316 X Operation Manual

COPY FUNCTIONS

SETTING THE NUMBER OF COPIES

Press the numeric keys to set the number of copies.
● The set number of copies appears in the display. A
maximum of 999 copies (factory default setting)
can be set.
● If you wish to make only a single copy, copying is
possible with the display showing "0".
If you enter the wrong number, press the
Note
[CLEAR] key (
number.

REDUCTION/ENLARGEMENT/ZOOM

The zoom function enables precise copy ratio selection from 25% to 400% in increments of 1%.
There are three ways to enlarge and reduce copies, as explained below.
• Reduction and enlargement ratios can be selected automatically with the [AUTO IMAGE] key (
"AUTOMATIC RATIO SELECTION" (below)
• Reduction and enlargement ratios can be selected manually with the [PRESET RATIO] selector keys
( , ) and/or the [ZOOM] keys (
"MANUAL RATIO SELECTION" (p.23)
• Separate settings can be selected for the vertical and horizontal ratios.
"SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY" (p.24)
Ratios that can be selected will vary depending on whether the original is placed on the document glass or in the
SPF.
Original position
Document glass
SPF

AUTOMATIC RATIO SELECTION

1
Place the original(s) in the document
feeder tray or on the document glass.
2
If the original is placed on the
document glass, select the original
size. (p.18)
Automatic ratio selection can be used when the
Note
original size is A5, A4, A4R, B4, A3 (5-1/2" x
8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
8-1/2" x 14" or 11" x 17"). The sizes of paper
that can be loaded vary by country and region. It
cannot be used for other sizes.
22
) and enter the correct
, ).
Selectable ratios
Important note when making a large number
of copies
The maximum number of copies can be changed in
the user programs. (p.34)
When the maximum number of pages (about 250
pages) that can be held in the paper output tray are
output, copying will temporarily stop. When this
happens, promptly remove the copies and press the
[START] key ( ) to resume copying. Copying will
also stop after about 500 pages and 750 pages.
Remove the pages and resume copying in the same
way.
25% – 400%
50% – 200%
3
Use the [TRAY SELECT] key (
select the paper tray with the desired
paper size.
).
AUTO %
) to
This feature will not work
when using copy paper
of non-standard size or
when using the bypass
tray.