Chapter 7
7
PERIPHERAL DEVICES AND SUPPLIES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact your authorised service representative.
PERIPHERAL DEVICES
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values in individual units.
AR-5320/5320 X
SINGLE PASS FEEDER
For the names of the parts of the SPF, see "PART NAMES AND FUNCTIONS". (p.8)
Specifications
Weight
Acceptable
original
Capacity
Detectable original
sizes*
Weight
Dimensions
* The detectable original sizes vary by country and region.
58
Size
(5-1/2 x 8-1/2" size originals cannot be used in the duplex copy mode.)
5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17"
AR-5316/5316 X
AR-SP6 (Single pass feeder)
2
56 g/m
to 90 g/m
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Up to 40 sheets (Thickness 4 mm (5/32") and below)
For B4 (8-1/2" x 13") and larger sizes, up to 30 sheets
A5, A4, A4R, B4, A3
5.0 kg (11.1 lbs.)
583 mm (W) x 435 mm (D) x 133 mm (H)
(22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H))
Single pass feeder
(AR-SP6)
2
(15 lbs. to 24 lbs.)