Tube Clamp Package Installation; Coupling And Tube Assembly - Roberts Gorden GordonRay BH-60 Installation, Operation & Service Manual

Step 6.2 Tube Clamp Package Installation
Description Part Number
Tube Clamp Package 0131890X
Step 6.3 Coupling and Tube Assembly
A
Close coupling and slide
opposite end into tab.
Position tab underneath
guide rail.
C
Insert tubes into coupling
until end of each tube rests
against internal pins.
Tube Clamp
Flat
Washer
Nut
(Torque 120 in/lb
13.56 Nm)
B
Insert wide end of slide bar/coupling lock into
guide rail on opposite end of tabs. Slide the slide
bar/coupling lock up the guide rail until snug
(approximately 3" (8 cm) to 4" (10 cm)).
D
Strike slide bar/coupling lock with mallet or hammer
until tight.
Description Part Number
Coupling
Slide Bar/Coupling Lock
Tube 91409XXX
SECTION 6: H I
EATER NSTALLATION
Bolt
01329600
01329700
21 of 63