Table of Contents
Advertisement
System Option Programming
Refer to the "System Option Table" to review the system options. Read each option carefully to
determine if you wish to make any changes.
NOTE: Because after clearing memory all options settings are automatically set to 0, and
because your most likely option selections require a status setting of 0, you do not need to
program this section unless you wish to change the default status.
Programming a System Option
System Option Flowchart
3
ER 5215 Electronic Cash Register
1.
Turn the control lock to the P position.
2.
Enter 3 0, press the SBTL key.
3.
Enter a system option address and press the X/TIME key.
4.
Enter the number representing the status you have selected, or if there is more than one
decision to be made in an address, add the values representing your choices for each
decision and enter the sum. Press the SBTL key.
5.
Repeat from step 3 for each system option you wish to change.
6.
Press the CASH key to end system option programming.
0
SBTL
Option #
Repeat for each
System Option
X/TIME
SBTL
Status
CASH
P-Mode Programming • 105
Advertisement
Table of Contents
