Updating Firmware Program; Update Files; Pc Connection Cable - Samsung ER 5215 Operator's Manual

Updating Firmware Program

The ER-5215 firmware program is loaded in flash EPROM. Occasionally, CRS/Samsung may provide
updates to the firmware in order to fix bugs and/or update the register feature set. The firmware
program can be transferred from a PC to an ER-5215 through the register's RS-232C port.
Note: There are two parts to the firmware program: Boot area and Program area. In most
cases, you will only need to update the program area. You will be notified where updates are
required.

Update Files

To complete the firmware update, you will be supplied with the following files:



PC Connection Cable

Use one of the following cables:


Part # 522035
Samsung
DB-9M
DCD1
RXD2
TXD3
DTR4
GND5
DSR6
RTS7
CTS8
VCC9
84 • S-Mode Programming
Download.exe (The update utility program)
ER5215.bin
CRS Part # 522035 (Register DB-9M to PC DB-9F)
CRS Part # 522038 (Register DB-9M to PC DB-25F)
PC
DB-9F
1DCD
2RXD
3TXD
4DTR
5GND
6DSR
7RTS
8CTS
9RI
Part # 522038
Samsung
DB-9M
DCD1
RXD2
TXD3
DTR4
GND5
DSR6
RTS7
CTS8
VCC9
ER 5215 Electronic Cash Register
PC
DB-25F
1ChGND
2TXD
3RXD
4RTS
5CTS
6DSR
7GND
8DCD
20DTR