System Option Programming - Samsung ER-550 Operator's And Programming Manual

System Option Programming

1. At the PROGRAM control lock position menu, press 3 for SYSTEM OPTION Programming.
The SYSTEM OPTION pg 1 screen displays.
2. Refer to "System Options - Reference Information" on page 104 to make program entries or
changes, press the CLEAR key to finalize and return to the PROGRAM MODE screen.
The 1st System
Option screen.
Press
PAGE DOWN
to view the 2
System Option
screen.
Press
PAGE DOWN
to view the 3
System Option
screen.
Press
PAGE DOWN
to view the 4
System Option
screen.
Samsung ER-550 Electronic Cash Register
SYSTEM OPTION pg 1
BEEPER ACTIVE?
CLERK ENTRY
METHOD?
0:PUSH 1:CODE
CLERK ASSIGNED WHEN
CLERK KEY IS
PUSHED (1-20)
SYSTEM OPTION pg 2
CLERK IS Y:POP-UP N
nd
N:STAY-DOWN
DRAWER NEEDS TO BE
SHUT TO OPERATE
OPEN DRAWER ALARM N
SECONDS TO ALLOW
DRAWER OPEN
SYSTEM OPTION pg 3
ALLOW POST TENDER N
rd
OPEN DRAWER ON
POST TENDER
ALLOW MULPTIPLE
RECEIPT
PLU SALES AFFECT
DEPT. ACTIVITY
SYSTEM OPTION pg 4
CASH DECLARATION REQ
th
BEFORE REPORTS
MGR CONTROL TO TEND.
NEGATIVE BALANCE N
MGR CONTROL TO TEND.
ZERO BALANCE
ALLOW CHECK-CASH. Y
Y 
Press ENTER
after making a
0
change, or press
ENTER to
advance the
arrow to the
next option
1
without making
a change.

Press PAGE Up
once to return to
the first option
Y
on a screen.
Press PAGE Up
again to return
to the previous
30
screen.

NOTE:
Be sure to press
ENTER after
N
changing a
selection. If you
N
do not press
ENTER, the
change will not
N
be accepted.
N 
Press YES/NO
to toggle from
'Y' to 'N' for yes
or no decisions..
N
Programming Instructions  101