Description Of Parts; Operator Panel; Operator Button; Beeper - Rimage DL5200 User Manual

Description of Parts

Operator panel

The operator panel has a two-line display that
informs you of operations or any conditions that
require operator intervention.
The Rimage DLN5200 displays the name of the
embedded PC or product name after it initializes.
The computer name is displayed by default. This is
helpful in identifying the embedded PC on the
network. Refer to the Operate Gemini Utilities
section on page 18 to see other options.

Operator button

The operator button is a push button used to open
and close the print drawer. The operator button is
only accessed by removing the front panel.
Press the operator button to open the print
drawer. Press it again to close the print drawer.

Beeper

The Rimage DL5200/DLN5200 has a beeper that sounds when user intervention is required. Read the
condition on the operator panel or at the client application and take appropriate action to correct the
problem. To stop the beeping, open the supply door.
To change the number of beeps or to disable the beeper, refer to the Enable the beeper section on page 18.

Output trays

The Rimage DL5200/DLN5200 is configured with
five output trays and an output bin. When a disc is
recorded and printed, the lift arm moves the disc to
the output bin or one of the output trays. The disc
slides out to the end of the tray. The sensor located
on each output tray detects if a disc is in the output
tray. The output trays are numbered 1 - 5, with 1
located at the top.
110768_F
Identify the Parts of the Rimage DL5200/DLN5200
Operator Button
Output
Trays
Operator Panel
Operator Panel
9