Table of Contents
Advertisement
5. Troubleshooting
If Test Print Fails
The power cord or USB cable is not properly con-
nected.
The port connection is not properly set.
5
The Printer Status monitor displays an error message. See
Ink feed is incomplete.
If you cannot solve the problem, contact sales or service representative.
38
Check that the power cord and USB cable are prop-
erly connected.
1) On the [Start] menu, point to [Settings], and
then click [Printers].
2) Click the icon of the printer, and then click
[Properties] on the [File] menu.
3) Click the [Details] tab (Windows 2000/XP,
Windows Server 2003, Windows NT 4.0: the
[Ports] tab) , and then check the printer port.
Select USB or network printer in the list
when the selected port connection is some-
thing other than USB or network printer.
To connect via USB when USB does not
appear in the list, you must re-install the
printer driver. See P.39 "Uninstalling".
User Guide
. See P.33 "Opening from Printer Sta-
tus error messages".
Ink begins automatically feeding into the print-heads
when the power of the printer is first turned on or
when a cartridge is replaced.
Wait until ink feed is complete at which point the
[Power] key stops blinking and remains lit.
Advertisement
Table of Contents
