Ricoh Aficio SPC221SF Quick Manual page 16

Using the Fax Function
When all originals have been scanned, press [2] to start sending
the fax.
• To cancel sending a fax, press the [Clear/Stop] key.
• A fax number can contain 0 to 9, pause, "∗", "#", and space.
• If necessary, insert a pause in a fax number. The machine pauses briefly before it dials the digits
following the pause.
• To use tone services on a pulse-dialing line, insert "∗" in a fax number. "∗" switches the dialing
mode from pulse to tone temporarily.
• If paper is jammed in the ADF, the jammed page has not been scanned properly. When the
machine is in Immediate Transmission mode, resend the fax starting from the jammed page.
When in Memory Transmission mode, scan the entire originals again.
• You can also specify a fax destination using the Quick Dial, Speed Dial, Broadcast, or Redial
functions. For details, see "Using the Fax Function", User Guide.
• By default, the machine is set to print a transmission report automatically after a fax transmis-
sion. To change this setting, see "Configuring the Machine Using the Control Panel",
User Guide.
• For information about originals, see "Getting Started", User Guide.
16