Copying From The Bypass Tray; Using The Bypass Tray - Ricoh Aficio 615c Operating Instructions Manual

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards and copy paper that cannot be loaded in the paper trays.
Important
❒ Paper has a vertical length of 90-305 mm (3.6-12 inch) and a horizontal length
of 148-457.2 mm (5.9-18 inch) can be copied from the bypass tray.
❒ The machine can detect the following sizes as regular size copy paper:
• Metric version
A3L, A4L, A5L, 8" × 13"L
• Inch version
11" × 17"L, 8
If you want to use the size of paper other than the above, be sure to specify
the size.
❒ When paper larger than 433 mm (17.1 inch) in size is used, the paper may be-
come wrinkled, may not be fed into the machine, or may cause paper jams.
Reference
See "Copy Paper", About This Machine.

Using the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, thick paper, envelopes
and copy paper that cannot be loaded in the paper trays.
Important
❒ When copying on OHP transparencies or paper heavier than 104.7 g/m
(about 28 lb.) you need to specify the type and size of paper.
❒ The maximum number of sheets you can load into the bypass tray depend on
paper type. The number should not exceed the upper limit.
A
Open the bypass tray.
" × 11"L, 5 " × 8
1 1
/ /
2 2
ALZ037S
Copying from the Bypass Tray
1
/ "L
2
2
2
21