User Qualifications; Instrument Compatibility; Repair And Modification - Olympus UCR Instructions Manual

Important Information — Please Read Before Use


User qualifications

If there is an official standard on user qualifications to perform endoscopy, endoscopic treatment, and
endoscopic surgery that is defined by the medical administration or other official institutions, such as
academic societies on endoscopy or endoscopic surgery, follow that standard. If there is no official
qualification standard, the operator of this instrument must be a physician approved by the medical
safety manager of the hospital or person in charge of the department (department of internal medicine,
etc.).
The physician should be capable of safely performing the planned endoscopy, endoscopic treatment,
and endoscopic surgery following guidelines set by the academic societies on endoscopy or
endoscopic surgery, etc., and considering the difficulty of endoscopy, endoscopic treatment, and
endoscopic surgery. This manual does not explain or discuss endoscopic procedures.


Instrument compatibility

Refer to the " System chart" on page 67 to confirm that this instrument is compatible with the ancillary
equipment being used. Using incompatible equipment can result in patient injury and/or equipment
damage.
This instrument complies with the EMC standard for medical electrical equipment, edition 4
(IEC 60601-1-2: 2014).
When connecting to an instrument that complies with a previous edition of the EMC standard for
medical electrical equipment edition, the EMC characteristics could be vulnerable.


Repair and modification

This instrument does not contain any user-serviceable parts. Do not disassemble, modify, or attempt to
repair it; patient or user injury and/or equipment damage can result.
Some problems that appear to be malfunctions may be correctable by referring to Chapter 7,
"Troubleshooting".
If the problem cannot be resolved using the information in Chapter 7, contact Olympus.
6
UCR INSTRUCTION MANUAL