3.2 Installation Of The Endoscopic Co2 Regulation Unit; Connecting A Co2 Gas Cylinder - Olympus UCR Instructions Manual

3.2 Installation of the endoscopic CO2 regulation unit

3.2 Installation of the endoscopic CO
unit
Ch.3
1
Make sure that the operation of the instrument will take place according to the
conditions described in "Transportation, storage, and operating environments" on
page 69.
2
Place the endoscopic CO
3.3 Connecting a CO
The optional cylinder hose (MAJ-1080, MAJ-1081, MAJ-1082) is required for connection of the CO
cylinder.
26
CAUTION
• Never place the endoscopic CO
• If the endoscopic CO
mobile workstation must be of adequate strength and size to safely hold it.
• Do not place any object on top of the instruments. Otherwise, equipment
deformation and/or damage can result.
• Clean and vacuum dust the ventilation grills using a vacuum cleaner. Otherwise,
the endoscopic CO
2
regulation unit on a level, stable surface.
2
DANGER
Using other gases than medical grade CO
complications, etc. In addition, oil, impurities, etc., may penetrate the interior of the
endoscopic CO regulation unit and impede proper CO
2
CAUTION
• If the cylinder hose is damaged, replace it with a new one.
• Always keep the gas cylinder in the upright position. Fasten the cylinder to a wall or
another stable structure to prevent it from toppling. If the gas cylinder is placed
horizontally or in an inclined position, liquefied CO
channel inside the endoscopic CO
become impossible.
• Olympus is not liable for any injury or damage due to improper cylinder connection.
UCR INSTRUCTION MANUAL
regulation unit on its side or upside down.
2
regulation unit is to be placed on a mobile workstation, the
2
regulation unit may break down from overheating.
gas cylinder
2
may result in fire, poisoning,
2
regulation unit and normal insufflation may
2
regulation
2
gas insufflation.
2
may enter the insufflation
2
2