Error Messages - Ricoh GR Digital User Manual

J. Error Messages
If an error message is displayed on the LCD Monitor, take the
corresponding action.
Error Message
INSERT CARD
SET THE DATE ON THE SETUP
MENU
FILE NUMBER OVER
UNMATCHED FILE
INSUFFICIENT MEMORY.
CONTINUE?
PROTECTED
THE CARD IS WRITE-
PROTECTED.
PRINT SETTINGS CANNOT BE
SET FOR THIS FILE
INSUFFICIENT MEMORY
FORMAT INTERNAL MEMORY
FORMAT CARD
CARD ERROR
WRITE TO CARD
NO FILE
CANNOT RECORD
Cause and Action
No card is loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Please use
another card, or delete unwanted files.
The camera cannot display this file. Check the file contents
on your computer, and then delete the file.
Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card.
You are trying to delete a protected file.
The card is "Locked (write-protection)". Unlock the card.
This file (movies and other) cannot be selected for printing.
Files cannot be stored. Make sure there is enough free
space, or delete files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
It is necessary to format internal memory.
The card is not formatted.Format the card.
Please reformat. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The Number of remaining shots is 0. Switch to another card
or internal memory.
Page
P.25
P.134
P.132
-
P.22
P.112
P.22
-
P.56,
P.124,
P.125
-
P.125
P.124
P.124
-
-
-
197