Setting The Date And Time - Ricoh GR Digital User Manual

Setting the date and time

When the power is turned on for the first time and the language
setting is completed, the date/time setting screen appears.
1.
Press the !"#$ buttons to set
the year, month, date and time.
Change the value with !" and move
the frame with #$.
2.
In [FORMAT], choose the Date and
Time format.
Select the format with !".
3.
Check the display on the bottom of
the screen and then press the
M/O button.
The date is set.
Pressing the DISP. button on this screen
allows you to cancel the setting.
Note
• If the batteries are removed for more than one week, the date and time settings will be lost.
These settings must be made again.
• To retain the date and time settings, load a fully charged battery in the camera for more
than two hours.
Reference
• For how to correct the set date and time,, see P.134.
• For how to put a date stamp on each frame, see P.86.
Setting at shipping
1
31