Turning The Power On/Off - Ricoh GR Digital User Manual

Turning the Power On/Off

To turn the power on:
1.
Press the Power button.
After the start sound, the auto-focus/flash
lamp blinks for several seconds.
Using the Camera in Playback Mode
Pressing the Playback button for more
than one second turns on the camera in
Playback Mode, allowing you to start
playback at once.
To turn the power off:
1.
Press the Power button.
Caution
• If you have turned on the camera by pressing the Playback button, pressing the Playback
button again allows you to select the Shooting Mode.
• It takes longer from power-on until the camera becomes ready for shooting when the flash
is enabled than when it is disabled.
Note
Auto Power Off
If the camera goes unused for a set period of time, it will automatically turn itself off to save
power. To continue on using the camera, slide the power switch to close the lens cover once
(power-off) and slide it again to open (power-on).
Reference
For how to change the Auto Power Off setting, see P.128.
1
29