Ricoh GR Digital User Manual page 91

6.
Press the M/O button.
White Balance settings are completed
and the symbol appears on the screen.
This setting will be used for shooting
until you change it.
Setting the White Balance Manually (Manual Setting)
1.
Make sure the camera power is on and turn the mode dial to
5, P, A or M.
2.
Press the ADJ. dial.
The camera enters the ADJ. mode.
3.
Turn the ADJ. dial.
4.
Press the #$ buttons until the White Balance menu
appears.
5.
Press the !" buttons to select
(Manual Setting).
6.
Point the camera at a piece of
paper or something white under
the lighting conditions for your
picture.
7.
Press the DISP. button.
White Balance is set.
8.
Press the M/O button.
The setting of white balance is completed
and the LCD monitor displays a marking.
This setting will be used for shooting until
you change it.
If you press the DISP. button in step 7, the
screen refreshes to show the White
Balance settings made. If the result is not
as expected, repeat steps 6 and 7 to change the settings as many times
as required.
2
89