Features - Rinnai Pro Series Operation Manual

Features

Feature
Eco mode
Stepless comfort
technology
Multi outdoor fan speed
Multi indoor fan speed
Gear
Turbo mode
Timer
Anti-cold air function
Sleep mode
Fast cool / heat
Temperature
compensation
Dry (dehumidifier) mode
Auto defrost
6 |
Explanation
System will run on an 8-hour saving mode which can reduce
energy consumption by up to 60%.
Inverter frequency is smooth ensuring temperatures are
consistently maintained and operating efficiency is high.
DC fan motor, outdoor fan speeds increase from two to nine, giving
more setting options and energy saving.
Up to 12 indoor fan speeds, ensuring more accurate control and
bringing more comfortable air flow.
Gear is a function within ECO that caps the compressor speed
of the outdoor unit, which reduces electricity consumption. Three
setting options 50%, 75% or 100%.
This function gives you a boost in cooling or heating power for a
period, and makes the room cool down or heat up rapidly.
Set the unit to start and stop automatically in a 24 hour period.
Indoor fan speed is regulated automatically from the lowest grade
to the setting grade according to the evaporator temperature when
the unit starts heating. This function prevents cold air blowing and
causing discomfort.
Enables the air conditioner to automatically increase cooling or
decrease heating 1 °C per hour for the first two hours, then holds
steady for the next five hours, after that it will switch off. This
function maintains both energy saving and comfort at night.
The compressor will maximise running efficiency so you can enjoy
cooling and heating in seconds.
The controller temperature reading can be adjusted to allow for any
variation between the actual room temperature and temperature at
the location of the controller.
Takes moisture out of the air when humidity gets high.
Prevents the evaporator from freezing and maintains dehumidifying
under a low temperature environment.