Table of Contents
Advertisement
Smart Install mode
This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the
functions . Execute Smart Install mode after installation .
1 . Check the installation status of the air conditioner .
1) Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and amount of
additional refrigerant required for pipe extension .
2) Status of the indicator after supplying the power : Standby status
2 . When the air conditioner is in standby status, use the remote controller to start the Smart Install mode .
1) Press the [SET], [Mode], [Power] button simultaneously for 4 seconds .
f Smart Install mode can be operated only with the supplied remote controller .
f
f During the Smart install mode procedure, remote controller cannot be operated .
f
❋ Remote controller may be different (image/functions) depending on the model .
NA_GOOD_A3050_IB&IM_EN_DB68-05202A-02.indd 51
English-51
11/6/2015 2:33:36 PM
Advertisement
Table of Contents
