Smart Install mode
This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the
functions . Execute Smart Install mode after installation .
1. Check the installation status of the air conditioner through communication between indoor & outdoor.
1) Check the power supply, service valve (open/close), wiring $ piping connection of the indoor and outdoor unit and
additional refrigerant charge in case of longer pipe than design specification .
2. When the air conditioner is in standby status, use the remote controller to start the Smart Install mode.
1) Press the [SET], [Mode], [Power] button simultaneously for 4 seconds .
f Smart Install mode can be operated only with the supplied remote controller .
f
f During the Smart install mode procedure, remote controller cannot be operated .
f
❇ ❇ Remote controller may be different (image/functions) depending on the model .
RAC BORACAY_EN_Eco-inverter IBIM_05124A-00.indd 50
English-50
2014-12-18 오후 3:06:56