Changing The Lighting & Contrast - Sl70M Mono Display - Raymarine SL70M Owner's Handbook Manual

Sl70 plus series pathfinder radar display
Table of Contents

Advertisement

Chapter 2: Getting Started & Adjusting the Display
2. Use the trackpad to move the selection bar over the option SIMULATOR . The
simulator soft keys are displayed.
3. In the system set up menu, press RADAR to view a simulated radar image,
DATA to view simulated numerical data and waypoint display, or BOTH to
view simulated radar data.
4. Press ENTER twice to return to the default display.
Changing the Lighting & Contrast - SL70M Mono Display
You can change the level of backlighting and contrast for the screen and keys.
The key lighting is set the same as the screen lighting, except that it remains
switched on at its lowest level even when the screen lighting is turned off, so
that you can always find the keys.
➤ To change the lighting and contrast:
1. Press the MULTI key to display the soft key controls:
The last-used soft key is highlighted in inverse video (white text on a black
background).
If you press MULTI during the magnetron warm-up sequence countdown,
only the LIGHT and CONTRAST sliders are displayed, and the lighting is
automatically switched on at its last-used level.
2. To select a control (if it is not already highlighted) press the soft key.
Alternatively, you can press the trackpad left and right edges to move side-
ways between the controls to select the soft key.
3. If necessary, press the soft key to toggle the control ON/OFF .
4. Use the trackpad (up or down) to increase or decrease the setting (between
0 and 100 in 1% steps). You can press and hold the trackpad to change the
setting more rapidly. The lighting/contrast level is adjusted as you change
the setting.
5. Press ENTER to remove the soft key sliders and return to the default screen,
with the new lighting and contrast levels retained, or press CLEAR to dis-
card the changes and return to the default screen.
If lights are left ON when you switch off the display, the next time the display
is switched on, the lights will be ON , but at the default setting of 40%. The new
O
F
F
A
U
T
O
D3935-3
2-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl70 plusSl70c

Table of Contents