Integrated System Checks; Received Data; Transmitted Data - Raymarine SL70M Owner's Handbook Manual

6-28

6.9 Integrated System Checks

Received Data

If either SeaTalk or NMEA In is connected, verify that the expected data is
displayed.
1. Press DISPLAY and select the NAV DATA WINDOW ON.
Check that the expected data is displayed.
2. If heading data is connected select Radar mode and check heading is dis-
played in the Status Bar.

Transmitted Data

If SeaTalk or NMEA Out is being transmitted to other equipment, check that
the data is being received correctly.
An NMEA Out connector is used to transmit navigation data. The NMEA
Output cable should be connected to the upper, left connector on the rear of the
display unit.
Note: The NMEA Output cable has a ferrite clamp attached to ensure EMC
conformance.
SL70M & SL70C PLUS Pathfinder Radar Displays