Adjusting Display/Keypad Lighting And Contrast; Lighting - Raymarine autopilot control unit Owner's Handbook Manual

Chapter 2: Basic Operation

2.3 Adjusting display/keypad lighting and contrast

Lighting

Note: When the display lighting is off, the control unit illuminates the
keys at a courtesy level.
To adjust the display and keypad lighting:
1. Press disp for 1 second from any mode to access the LAMP screen
2. Press the disp key to cycle through the possible illumination
3. The display automatically returns to the previous mode if you do
Note: You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
Note: When you switch off the unit you lose any changes you have
made to the lighting level.
and turn on the lights.
settings: LAMP 3 (the brightest setting) , LAMP 2, LAMP 1, OFF,
LAMP 1, LAMP 2, LAMP 3 and so on:
• as you change the setting, the illumination on any other
SeaTalk instruments or control units will also change
SECOND
not press a key for 10 seconds:
• if you press another mode key within 10 seconds you will
select the mode assigned to that key (for example: auto
selects Auto mode, standby selects Standby mode)
15
D5517-1