Table of Contents
Advertisement
To connect to the web UI
Requires: Microsoft Internet Explorer 8, Mozilla Firefox 20, Apple Safari 6,
or Google Chrome 20 or newer
1. Using the Ethernet cable, connect port1 of the appliance to your computer .
2. Configure your computer to match the appliance's default port1 subnet .
For example, on Windows 7, click the Start (Windows logo) menu to
open it, then click Control Panel . Click Network and Sharing Center,
Local Area Connection, and then the Properties button . Select
Internet Protocol Version 4 (TCP/IPv4) then click its Properties button .
Select Use the following IP address, then change your computer's
settings to:
• IP address:
• Subnet mask:
3. To connect to FortiDB's web UI, start a web browser and go to
https://192 .168 .1 .99 .
4. Type admin in the User Name field, type fortidb1!$ in the Password
field blank, then click Login .
To connect to the CLI via serial console
Requires: Terminal emulator such as PuTTY, Tera Term, or a terminal server
1. Using the console cable, connect the appliance's console port to your
terminal server or computer .
2. On your computer or terminal server, start the terminal emulator .
Use these settings:
• Baud rate:
• Data bits:
• Parity:
• Stop bits:
• Flow control:
3. Press Enter on your keyboard to connect to the CLI .
192 .168 .1 .2
255 .255 .255 .0
(Remember to include the "s" in https:// .)
9600
8
None
1
None
5
Advertisement
Table of Contents
