Fortinet FortiDB-1000B Quick Start Manual

LED State
Green
Ports 1 and 2 Left
Flashing
Ports 1 and 2 Right Off
Green
Ports 3 and 4 Left LED
Flashing
Green
Ports 3 and 4 Right LED Amber
Off
Package Contents
Connector Type Speed
Ports 1 to 4 RJ-45 10/100/1000 Base-T
CONSOLE DB-9 9600 8/N/1
USB USB
For future
use
Connecting
Connect the following to the FortiDB unit. Ensure the FortiDB
unit is placed on a stable surface or install in a standard 19 inch
rack. See the FortiDB-1000B Rack Installation Guide for details.
• Insert one end of a an Ethernet cable into port 1.
• Connect the other end of the Ethernet cable to the network
hub or switch.
• Connect the AC Power cable to the Power Supply on the
back of the
FortiDB unit.
• Connect the other end of the Power cable to a surge pro-
tected
power bar or power supply.
Configuration Tools
Web-based manager
The FortiDB web-based manager is an easy-to-use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and configure reports.
Requirements:
• An Ethernet connection between the FortiDB unit and management computer.
• A web browser such as FireFox or Internet Explorer on the management computer.
Description
The correct cable is connected to the interface and
the connected equipment has power
Network activity at this interface.
Not used
The correct cable is connected to the interface and
the connected equipment has power.
Network activity at this interface.
The interface is connected at 1000 Mbps.
The interface is connected at 100 Mbps.
The interface is connected at 10 Mbps.
Protocol Description
Ethernet Copper gigabit connection to 10/100/1000 copper networks.
RS-232 serial Optional connection to the management computer. Provides access to the command line interface (CLI).
USB Optional connection to a USB key for firmware installation.
Ethernet ports
Console USB
connection
2 Mounting Slide Rails
Power Cable
Straight-through Null-Modem Cable
Ethernet cable
QuickStart Guide
© Copyright 2009 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
10 November 2009
Power supply
Ethernet
ports
QuickStart Guide
Tools and Documenation
Copyright 2009 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
(RS-232)
Ethernet cables connect to
the internal network and to
the Internet (public switch
or router)
Null modem
cable connects to serial
port on management
computer
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD included with the
FortiDB unit.
Requirements:
• The DB9 serial connection between the FortiDB unit and management
computer.
• A terminal-emulation application such as HyperTerminal for Windows, on the manage-
ment computer.
15-40000-113534-20091110
R
FortiGate-30B
R
REGISTER
Ethernet cables connect to
the internal network and to
the Internet (public switch
or router)
FortiDB-1000B
R
Power cable
connects to
power supply