Wheel Drive; Installation Stages - Raymarine Mk II Installation Manual

6

Wheel drive

The Raymarine wheel drive will fit 3, 4, 5, 6, 7 or 8 spoke wheels. It is designed to operate with
steering systems with between 1 to 3.5 turns lock to lock.
Clamp screw,
M5 x 16 mm (x6)
Spoke clamp (x3)

Installation stages

Installing the wheel drive involves four steps:
1. Drilling the spoke clamp holes in the front cover.
2. Securing the wheel drive to the wheel.
3. Attaching the pedestal bracket.
4. Connecting the drive to the course computer.
Wheel drive
front cover
Clamp insert (x3)
Wheel drive – main parts
Pre-drilled spoke Bracket screw,
clamp holes (x2) No 10 x 3/4 inch (x4)
MK II Wheel Drive
Pedestal
bracket
Bracket pin
Cable plug
Cable socket
Motor tube
Clutch lever