External Power Connection; External Data Connection - Raymarine GPS 11 User Manual

14
Note:

2.4 External Power connection

The GPS11 may be connected to an external power supply between
10V and 24V d.c..
Connection is made via any of the Power/Data cables shown on
page 13 and should be protected by a 5 Amp fuse or circuit breaker.
Red
Blue
5 Amp
10V - 32V d.c.

2.5 External Data Connection

The GPS11 is capable of outputing data to other navigational
instrumentation or accepting waypoint information from an
external source (P.C.).
Connection is made via the supplied Power/Data cable.
Data communications protocols must be set up correctly in the
"SET-UP PORT" section, see page xx.
Apelco GPS11 Installation and Operation Handbook
4
Blue
3
2
1
Red
5
6
7
D4121-1