Table of Contents
Advertisement
Apelco GPS11 Installation and Operation Handbook
32
The highlighted setting is WPT:, press ENTER to select the waypoint
name option.
wptname
Use the trackpad up and down arrows to select the first letter or
number of your waypoint name then use the right arrow to move on
to the next digit. Continue until the waypoint name is complete (max.
6 digits) and press "ENTER".
Use the down arrow to highlight LATITUDE: and press ENTER.
lat
Use the up and down arrows to select the digits and the right and left
arrows to move around until the correct waypoint latitude has been
entered. Press the ENTER button.
Use the down arrow to highlight LONGITUDE? and press ENTER.
lon
Repeat the above procedure to enter the correct waypoint longitude.
Advertisement
Table of Contents
