Raymarine GPS 11 User Manual page 49

46
Advancing through a Route
When you reach a waypoint there are two options:
1. The GPS position will enter the arrival circle which is preset at 0.1nm
and will display the arrival message.
wptadv1
Press ENTER to display the Route Data for the next leg and start
tracking to the next waypoint.
2. You physically arrive at the waypoint but the GPS position is greater
than 0.1nm from the waypoint position (possibly due to poor
reception). In this case it will be necessary to manually advance to the
next waypoint as shown below.
From the Route Data page highlight ACTI? on the menubar and
press ENTER.
wptadv
Use the trackpad to highlight NEXT LEG? and press ENTER.
Apelco GPS11 Installation and Operation Handbook