22
6. Locate the bezel over the front of the display. See "Attaching the front bezel" on
page 24.
7. Check that the buttons have passed through the bezel and are free to operate. It is
suggested that you use your thumb or forefinger in a circular motion to do this.
8. Adjust the unit to the required angle for clear vision, and tighten the trunnion
knobs.
Flush mount
Your display can be flush mounted on the console as follows:
1. Check the selected location for the unit. A clear, flat area with suitable clearance
behind the panel, is required.
2. Fix the appropriate template - C70, C80 or C120, supplied in the document wallet,
to the selected location, using masking or self-adhesive tape.
C-Series Displays Installation Manual
D6739_1