Stamina Airgometer 1100 Owner's Manual page 11

Hide thumbs Also See for Airgometer 1100:

Table of Contents

ASSEMBLY INSTRUCTIONS

STEP 8

There is an "L" mark on the bottom side of the LEFT REST PEDAL(62), and an "R" mark on the bottom

side of the RIGHT REST PEDAL(63).

Attach the RIGHT REST PEDAL(63) to the HANDLEBAR SHAFT(69) in the RIGHT HANDLEBAR(7)

with WAVY WASHER(ø17xø22x0.4mm)(49), WASHER(ø10xø25.4x2mm)(61), and the SHAFT

BOLT(65). Press the PEDAL COVER(64) into the RIGHT REST PEDAL(63). Repeat on other side.

STEP 9

NOTE: The RIGHT PEDAL(56) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(56)

has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(55) has L

stamped on the end of the pedal shaft. The LEFT PEDAL(55) has left hand threads and is

tightened by turning counterclockwise.

Thread the RIGHT PEDAL(56) into the RIGHT CRANK(54) as shown. Tighten the pedal securely. The

shoulder of the shaft of the RIGHT PEDAL(56) should be in contact with the RIGHT CRANK(54) when

securely tightened. Repeat on the left side to attach the LEFT PEDAL(55) to the LEFT CRANK(53).

Shoulder

Table of Contents

15-1100a